ADLS Gen1 File Metadata (deprecated)

The ADLS Gen1 File Metadata executor changes file metadata, creates an empty file, or removes a file or directory in Azure Data Lake Storage Gen1 each time it receives an event. To perform these tasks in Azure Data Lake Storage Gen2, use the ADLS Gen2 File Metadata executor. For information about supported versions, see Supported Systems and Versions in the Data Collector documentation.
Important: This stage is deprecated and may be removed in a future release.

Before you use the executor, you must perform some prerequisite tasks.

You cannot perform multiple tasks in the same executor. To perform more than one task, use additional executors.

Use the ADLS Gen1 File Metadata executor as part of an event stream. For example, you might use the executor to move a file or change file permissions after it receives a file closure event from the Azure Data Lake Storage Gen1 destination.

When changing metadata, you configure an expression that represents the location and name of the file to process, and then specify the changes you want to perform. When creating an empty file, you specify the output location for the file, and can optionally specify the owner, permissions, and ACLs for the file. When removing a file or directory, you specify the location of the file or directory.

When necessary, you can configure advanced properties to pass to the underlying Hadoop file system.

You can also configure the executor to generate events for another event stream. For more information about dataflow triggers and the event framework, see Dataflow Triggers Overview.

For a solution that describes how to use a similar file metadata executor, see Managing Output Files.

Prerequisites

Complete the following prerequisites before you configure the ADLS Gen1 File Metadata executor:
  1. If necessary, create a new Azure Active Directory application for Data Collector.

    For information about creating a new application, see the Azure documentation.

  2. Ensure that the Azure Active Directory Data Collector application has the appropriate access control to perform the necessary tasks.

    The Data Collector application requires Read, Write, and Execute permissions to perform all possible tasks.

    For information about configuring Gen1 access control, see the Azure documentation.

  3. Retrieve information from Azure to configure the executor.

After you complete all of the prerequisite tasks, you can configure the executor.

Retrieve Authentication Information

ADLS Gen1 File Metadata executor connects to Azure using Azure Active Directory service principal authentication, also known as service-to-service authentication.

The executor requires the following Azure authentication information:
  • Application ID - Application ID for the Azure Active Directory Data Collector application. Also known as the client ID.

    For information on accessing the application ID from the Azure portal, see the Azure documentation.

  • Auth Token Endpoint - OAuth 2.0 token endpoint for the Azure Active Directory v1.0 application for Data Collector. For example: https://login.microsoftonline.com/<uuid>/oauth2/token.
  • Application Key - Authentication key or client secret for the Azure Active Directory application. Also known as the client secret.

    For information on accessing the application key from the Azure portal, see the Azure documentation.

Related Event Generating Stages

Use the ADLS Gen1 File Metadata executor in the event stream of a pipeline. The ADLS Gen1 File Metadata executor is optimized to update file metadata for output files or whole files processed by the Azure Data Lake Storage Gen1 destination or another ADLS Gen1 File Metadata executor. However, you can use the executor in any logical way.

Changing Metadata

You can configure the ADLS Gen1 File Metadata executor to change metadata for a file in Azure Data Lake Storage Gen1 after receiving an event. For example, you might use the executor to change file permissions after a destination closes a file.

When changing file metadata, the ADLS Gen1 File Metadata executor can change the following file metadata at the same time:
  • File name
  • File location
  • File owner and group
  • File permissions
  • Access control lists (ACLs)

To change metadata, the Azure Active Directory application for Data Collector must have the required permission.

Specifying the File Path

When using the ADLS Gen1 File Metadata executor to change file metadata, specify an expression for the File Path property that provides an absolute path to the files you want to use.

Use the default file path expression, ${record:value('/filepath')}, to update output files closed by the Azure Data Lake Storage Gen1 destination. The file closure event records generated by this destination include a filepath field that contains the location and name of the closed output files.

To update whole files that the Azure Data Lake Storage Gen1 destination has completed streaming, use the following expression:
${record:value('/targetFileInfo/path')}

The whole file processed event records from the destination include a /targetFileInfo/path field that contains the location and name of the processed whole files.

For more information about the event records generated by the Azure Data Lake Storage Gen1 destination, see Event Records.

Changing the File Name or Location

When using the ADLS Gen1 File Metadata executor to change file metadata, you can change the name or location of files after they close. When you specify new file names and locations, you can enter constants or expressions. Use any expression that evaluates to the values that you want to use.

When needed, you can include file functions in expressions to specify part of the existing file path. File functions can return any part of a path, file name, or extension.
Example for moving files
Say the Azure Data Lake Storage Gen1 destination writes JSON files to the following directory structure:
/server1/weblogs/<subdir>/<filename>
After the files are written, you want the ADLS Gen1 File Metadata executor to move the files to a different root directory. When moving files you need to specify the new location for the files. So you configure the executor to move files to a different directory while still using the rest of the path, as follows:
/newDir/${file:pathElement(record:value('/filepath'),1)}/${file:pathElement(record:value('/filepath'),2)}/

This expression uses newDir as the new root directory, then uses two levels of subdirectories. Do not include file names when moving files.

Example for renaming files
Say you want to add the .json suffix to the original file name. When you rename files, you need to specify the new name for the files, so you use the following expression:
${file:fileName(record:value('/filepath'))}.json
This expression returns the file name from the filepath field in the event record and adds .json to the file name, such as <filename>.json.
If you wanted to strip the extension from written files, you could use the following expression in the New Name property:
${file:removeExtension(file:fileName(record:value('/filepath')))}
This expression returns the file name from the event record of the filepath field, strips the extension from the name, and uses the result as the new file name.

For more information about file functions, see File Functions.

Defining the Owner, Group, Permissions, and ACLs

When using the ADLS Gen1 File Metadata executor to change file metadata or create an empty file, you can define the file owner, group, file permissions, and the access control list (ACL).
Important: When the executor changes permissions, it removes existing permissions and implements the requested permissions. The executor does not add permissions to the existing permissions, so be sure to configure permissions exactly how you want them.
You can set permissions using any combination of the following methods:
Define a new owner and group
You can define the owner and group for files. When you use this option, you must enter both an owner and a group name.
Set file permissions using the octal or symbolic formats
You can set file permissions by entering the permissions you want to use in octal or symbolic format.
For example, you can use the following octal format to make files read-only:
0444
You can alternatively use the following symbolic format to make files read-only:
-r--r--r-- 
To make them read-only for the user and the group, forbidding all access to other users, you could use either of the following formats:
0440

-r--r-----
Define ACLs
You can define the ACLs for files. When you define ACLs, note that Azure Data Lake Storage expects permissions defined for the user, group, and other. You can alternatively add permissions for additional users or groups.
Use the following format to define ACLs:
user::<permissions>,group::<permissions>,other::<permissions>\
[,<user | group>:<user or group name:<permissions>]
Define permissions using the symbolic format, with r, w, x, or - representing the permission type.
For example, the following ACLs allow read access for the user and group only:
user::r--,group::r--,other::–-
If you wanted to allow read access to the operations group in addition to the group associated with the file, you would enter the following permissions:
user::r--,group::r--,other::–-,group:operations:r--

Creating an Empty File

You can configure the ADLS Gen1 File Metadata executor to create empty files in Azure Data Lake Storage Gen1 upon receiving an event. You might create empty files to trigger downstream actions in other applications, such as Oozie.

To create an empty file, specify an expression for the File Path property that provides an absolute path to the location where you want the file created.
Note: In most cases, you will not want to use the default expression. The default expression is more appropriate for changing file metadata.
When creating an empty file, you can also specify the following file details:
  • File owner and group
  • File permissions
  • Access control lists (ACLs)

For more information, see Defining the Owner, Group, Permissions, and ACLs.

Removing a File or Directory

You can configure the ADLS Gen1 File Metadata executor to remove a file or directory from Azure Data Lake Storage Gen1 after receiving an event.

For example, say you run a daily pipeline that writes data to Azure Data Lake Storage Gen1. You can use the ADLS Gen1 File Metadata executor to remove the target directory and all of its contents before a pipeline starts processing data. Simply configure the pipeline to pass the pipeline start event to an ADLS Gen1 File Metadata executor, then specify the target directory when you configure the executor. For more information about using pipeline events, see Pipeline Event Generation.

Remove directories with caution. The executor removes directories recursively, deleting any subdirectories and their contents in addition to the specified directory.

Event Generation

The ADLS Gen1 File Metadata executor can generate events that you can use in an event stream. When you enable event generation, the executor generates events each time it changes file metadata, creates an empty file, or removes a file or directory.

ADLS Gen1 File Metadata events can be used in any logical way. For example:

For more information about dataflow triggers and the event framework, see Dataflow Triggers Overview.

Event Records

Event records generated by the ADLS Gen1 File Metadata executor have the following event-related record header attributes. Record header attributes are stored as String values.
Record Header Attribute Description
sdc.event.type Event type. Uses the following event types:
  • file-changed - Generated when the executor changes file metadata, including file name, location, permissions, or ACLs.
  • file-created - Generated when the executor creates an empty file.
  • file-removed - Generated when the executor removes a file or directory.
sdc.event.version Integer that indicates the version of the event record type.
sdc.event.creation_timestamp Epoch timestamp when the stage created the event.
The ADLS Gen1 File Metadata executor can generate the following types of event records:
File changed

The executor generates a file-changed event record when it changes file metadata, including file name, location, permissions, or ACLs.

File-changed event records have the sdc.event.type record header attribute set to file-changed and include the following fields:
Event Field Name Description
filepath Most recent path and name of the changed file.
filename Most recent name of the changed file.
File created

The executor generates a file-created event record when it creates an empty file.

File-created event records have the sdc.event.type record header attribute set to file-created and include the following fields:
Event Field Name Description
filepath Location where the file was created.
filename Name of the file.
File removed

The executor generates a file-removed event record when it removes a file or directory.

File-removed event records have the sdc.event.type record header attribute set to file-removed and include the following fields:
Event Field Name Description
filepath Location of the directory that was removed, or the directory where the removed file was located.
filename Name of the file that was removed, when applicable.

Configuring an ADLS Gen1 File Metadata Executor

Configure an ADLS Gen1 File Metadata executor to create an empty file, change file metadata, or remove a file or directory from Azure Data Lake Storage Gen1 upon receiving an event.
Important: This stage is deprecated and may be removed in a future release.

Before you use the executor, you must perform some prerequisite tasks.

  1. In the Properties panel, on the General tab, configure the following properties:
    General Property Description
    Name Stage name.
    Description Optional description.
    Produce Events Generates event records when events occur. Use for event handling.
    Required Fields Fields that must include data for the record to be passed into the stage.
    Tip: You might include fields that the stage uses.

    Records that do not include all required fields are processed based on the error handling configured for the pipeline.

    Preconditions Conditions that must evaluate to TRUE to allow a record to enter the stage for processing. Click Add to create additional preconditions.

    Records that do not meet all preconditions are processed based on the error handling configured for the stage.

    On Record Error Error record handling for the stage:
    • Discard - Discards the record.
    • Send to Error - Sends the record to the pipeline for error handling.
    • Stop Pipeline - Stops the pipeline.
  2. On the Data Lake tab, configure the following properties:
    Data Lake Property Description
    Application ID Application ID for the Azure Active Directory Data Collector application. Also known as the client ID.

    For information on accessing the application ID from the Azure portal, see the Azure documentation.

    Auth Token Endpoint OAuth 2.0 token endpoint for the Azure Active Directory v1.0 application for Data Collector. For example: https://login.microsoftonline.com/<uuid>/oauth2/token.
    Account FQDN The host name of the Azure Data Lake Storage Gen1 account. For example:
    <service name>.azuredatalakestore.net
    Application Key Authentication key or client secret for the Azure Active Directory application. Also known as the client secret.

    For information on accessing the application key from the Azure portal, see the Azure documentation.

    Advanced Configuration

    Additional HDFS properties to pass to the underlying file system. ADLS Gen1 accesses data using the Hadoop FileSystem interface. Specified properties override those in Hadoop configuration files.

    To add properties, click the Add icon and define the HDFS property name and value. Use the property names and values as expected by Hadoop.

  3. On the Tasks tab, configure the following property:
    Task Property Description
    Task Type of task that the executor performs. You can create an empty file, change file metadata, or remove a file or directory.

    To do more than one type of task, add additional executors to the pipeline.

  4. To create an empty file, configure the following properties:
    Task Property Description
    File Path Expression that represents the full path to the file that you want to create.
    By default, the property uses ${record:value('/filepath')}.
    Note: In most cases, you will not want to use the default expression. The default expression is more appropriate for changing file metadata.
    Set Ownership Select to specify a file owner or group.
    New Owner The user name to become the new owner of the file.
    New Group The group to become the new group owner of the file.
    Set Permissions Select to set file permissions in an octal or symbolic format.
    New Permissions File permissions in octal or symbolic format.
    Set ACLs Select to define access control list (ACL) permissions.
    New ACLs Define ACLs for the owner, group, and other. You can optionally define other user and group permissions.
  5. To change file metadata, configure the following properties:
    Task Property Description
    File Path Expression that represents the full path to the file.

    By default, the property uses ${record:value('/filepath')}, which processes data in the filepath field. The Azure Data Lake Storage Gen1 destination generates file-closure event records that include the path to closed files in a filepath field.

    To update whole files that the Azure Data Lake Storage Gen1 destination has completed streaming, use the following expression:
    ${record:value('/targetFileInfo/path')}
    Move File Select to move the file.
    New Location New location for the file.
    Rename Select to rename the file.
    New Name New name for the file.
    Set Ownership Select to change the file owner or group.
    New Owner The user name to own the file.
    New Group The group to own the file.
    Set Permissions Select to set file permissions in an octal or symbolic format.
    New Permissions File permissions in octal or symbolic format.
    Set ACLs Select to define access control list (ACL) permissions.
    New ACLs Define ACLs for the owner, group, and other. You can optionally define other user and group permissions.
  6. To remove a file or directory, configure the following property:
    Task Property Description
    File Path Expression that represents the full path to the file or directory that you want to remove.

    The executor removes directories recursively, removing all subdirectories as well. Use with caution. For more information, see Removing a File or Directory.

    By default, the property uses ${record:value('/filepath')}.
    Note: In most cases, you will not want to use the default expression. The default expression is more appropriate for changing file metadata.