Oracle JDBC Table

The Oracle JDBC Table origin reads data from one or more Oracle tables. The origin can read all of the columns from the tables or only specified columns from the tables. Pipelines can contain only one origin configured to read from multiple tables. To read from one or more tables using a custom query, use the JDBC Query origin.

When you configure the Oracle JDBC Table origin, you specify database connection information and any additional JDBC configuration properties you want to use.

You configure the tables to read, and optionally define the columns to read from the tables. You specify the offset column and the maximum number of partitions used to read from a database table. The data type of the offset column can limit the number of partitions that the origin can use. You can also configure an additional predicate for the query.

With the origin configured to read from multiple tables, the pipeline processes multiple batches. In batch mode, the pipeline sequentially processes one batch for each table that the origin is configured to read, and then stops. In streaming mode, the pipeline also sequentially processes one batch for each table, but then waits a specified amount of time before repeating the process, starting from the first table once again.

When you configure the origin to read from exactly one table, you can configure the origin to load data only once. With this configuration, the origin only reads data during the first batch of a pipeline run and caches that data for reuse throughout the pipeline run. When you do not configure the origin to load data only once, you can configure the origin to cache data. With this configuration, the origin caches the data from each batch to pass that data efficiently to multiple downstream stages as the pipeline processes the batch. You can also configure the origin to skip tracking offsets.

You can optionally configure advanced properties such as specifying the fetch size, custom offset queries, and the JDBC driver to bundle with the pipeline.

Pipelines with the Oracle JDBC Table origin contain batch headers. In the header, the origin sets the jdbc.table attribute, which stores the name of the table that the origin reads for the batch. When the origin reads from multiple tables, you can use the attribute to determine the origin's data source for a batch.

Before you use the Oracle JDBC Table origin, install a JDBC driver.

StreamSets has tested this origin on Oracle 11g with the Oracle 19.3.0 JDBC driver.

Installing the Oracle JDBC Driver

Before using the Oracle JDBC Table origin, you must install an Oracle JDBC driver. Install the driver as an external library for the JDBC stage library.

If you install a driver provided by Oracle, the origin automatically detects the JDBC driver class name from the configured JDBC connection string. If you install a third-party driver, you must specify the driver class name on the Advanced tab of the origin.

By default, Transformer bundles a JDBC driver into the launched Spark application so that the driver is available on each node in the cluster. If you prefer to manually install an appropriate JDBC driver on each Spark node, you can configure the stage to skip bundling the driver on the Advanced tab of the stage properties.

Offset Column

Unless you configure the origin to skip offset tracking, the Oracle JDBC Table origin tracks an offset for each table that the origin reads.

By default, the origin uses the primary key column for each table as the offset column. However, if any table has a composite key or the data type in a primary key column is not a supported offset data type, you must specify the offset column.

As an alternative to the default, you can configure one offset column for the origin. You must specify a column that exists in each table that the origin reads. The offset column should contain unique, incremental values and should not contain null values. The offset column must also be a supported offset data type.

The Oracle JDBC Table origin uses the offset column to perform two tasks:

Track processing: The origin tracks processing using values in the offset column. When reading the last row for a batch, the origin saves the value from the offset column. In the subsequent batch, the origin starts reading from the following row.; For example, if the first batch in a pipeline includes offsets 1-250 based on an integer offset column, the origin creates the next batch starting from offset 251. Similarly, say a batch pipeline stops after processing offset 250. The next time the pipeline runs, the origin begins processing with offset 251, unless you reset the offset.
Create partitions: When tracking offsets and creating partitions, the origin determines the data to be processed and then divides the data into partitions based on ranges of offset values.; For example, say you have rows with integer offsets from 1 to 1000 and you configure the origin to create two partitions. The first partition might include records with offsets from 1-500, and the second partition, the offsets from 501-1000.; When not tracking offsets, the origin still creates partitions when possible. For more information, see Partition Column Selection.

Note: By default, the origin does not process records with null offset values. You can configure the origin to process those records.

Supported Offset Data Types

The supported data types for an offset column differ based on the number of partitions that you want the origin to use when reading the data.

The following table lists the Oracle data types that are supported for the offset column:


Partitions	Supported Offset Data Type
One partition	Char Nchar Nvarchar2 Varchar Varchar2
One or more partitions	Binary_double Binary_float Date Number Timestamp Timestamp with Timezone

Null Offset Value Handling

By default, the Oracle JDBC Table origin does not process records with null offset values. You can configure the origin to process those records by enabling the Partition for NULL property on the Advanced tab.

When you enable the Partition for NULL property, the origin queries the table for rows with null offset values, then groups the resulting records into a single partition. As a result, when the table includes null offset values, each batch of data contains a partition of records with null offset values.

Note: Null offset values preclude the origin from differentiating between records, so duplicate null offset records are likely to be included in each null partition and, therefore, written with each batch. Take care when using the Partition for NULL property, especially in streaming pipelines.

Default Offset Queries

The Oracle JDBC Table origin uses two offset queries to determine the offset values to use when querying the database. The default queries work for most cases. On the rare occasion when you want to produce different results, you can configure custom offset queries to override the default queries.

The origin uses the following offset queries to process data, by default:

Min/max offset query: This query returns the minimum and maximum values in the offset column. The origin uses these values to read all existing data in a table.; During the first run of the pipeline, the origin uses this query to read the first set of records from each table. The origin also uses this query after you reset the offsets for a pipeline.
Max offset query: This query returns the maximum offset in the offset column. The origin uses this value along with the last-saved offset to read new data that arrived since processing the last batch for a table.; The origin uses this query to read subsequent sets of records from each table in the pipeline.

Custom Offset Queries

Configure custom offset queries to override the default offset queries for the Oracle JDBC Table origin.

The origin allows configuring the following custom offset queries:

Custom Min/Max Query

Returns the minimum and maximum value to use as offsets when querying the database. Configure this query to override the default min/max query that determines the first set of records that the origin reads for each table.

The custom min/max query is a Spark SQL query that returns one row with two values: the minimum offset and the maximum offset. The origin uses the return values to determine the range of data to query. The offset range is inclusive.

For example, say your custom query returns 10 for min and 200 for max. The first time that the origin reads from the table, the origin reads all records with offsets between 10 and 200, inclusive. The second time it reads from the table, the origin reads from the 201 offset value.

Custom Max Query

Returns a maximum value to use as an offset when querying the database. Configure this query to override the default max query that the origin uses to read subsequent sets of records from each table.

While a custom min/max query defines the range of data to read in the first set of records from each table, a custom max query defines the maximum offset for each subsequent set of records.

The custom max query is a Spark SQL query that returns a single value. Note that the origin continues to check for new data to process, even after processing the custom max offset value.

Important: The data that the custom queries return must be convertible by the database and the database driver to the data type of the offset column. For example, most database systems can convert Smallint to Integer, and some database systems can convert string representations of timestamps to timestamp values.

Specify a custom max query along with the custom min/max query to define a range of data for the pipeline to process, such as data generated in 2019.

For example, say you want to process only the data with offsets 1000 to 8000, inclusive. And you want the first batch to process one thousand records. To do this, you configure the custom min/max query to return 1000 and 2000. This sets the lower boundary of the data that the origin reads and defines the number of records included in the first batch. To set the upper boundary of the data that the origin reads, you set the custom max query to 8000.

In the first batch, the origin reads records with offsets between 1000 and 2000, inclusive. In the second batch, the origin reads any new records with offsets between 2001 and 8000, inclusive. Now, say the last record in the second batch has an offset value of 2500. Then, in the third batch, the origin reads any new records with offsets between 2501 and 8000, and so on.

Partitioning

Spark runs a Transformer pipeline just as it runs any other application, splitting the data into partitions and performing operations on the partitions in parallel. When the pipeline starts processing a new batch, Spark determines how to split pipeline data into initial partitions based on the origins in the pipeline.

For the Oracle JDBC Table origin, Spark determines the number of partitions from the maximum number of partitions and the table's partition column. Spark splits the data from the table into the partitions and creates one connection to the database for each partition.

Spark uses these partitions while the pipeline processes the batch unless a processor causes Spark to shuffle the data. To change the partitioning in the pipeline, use the Repartition processor.

Consider the following when you configure the properties that determine the number of partitions for the origin:

The size and configuration of the cluster.
The amount of data being processed.
The number of concurrent connections that can be made to the database.

If the pipeline fails because the origin encounters an out of memory error, you likely need to increase the number of partitions for the origin.

Partition Column Selection

By default, the Oracle JDBC Table origin uses the offset column for the table as a partition column to improve read performance.

When you configure the origin to skip offset tracking, the origin uses the following strategies, in order, to select a partition column:

When configured, the origin uses the field specified in the Offset Column property to create partitions.
When no offset column is specified and the table includes a single-column primary key, the origin uses the primary key column for partitioning.
When no offset column is specified and the table has a compound primary key instead of a single-column primary key, the origin uses the first key column for partitioning.
When no offset column is specified and the table has no primary key columns, the origin uses the first datetime or numeric column that is indexed for partitioning.

When the origin cannot locate a partition column, it reads the entire table in a single partition.

Oracle Data Types

The following table lists the Oracle data types that the Oracle JDBC Table origin supports and the Transformer data types they are converted to.

Oracle data types not listed in the table are not supported.


Oracle Data Type	Transformer Data Type
Binary_Float	Float
Binary_Double	Double
Blog	Binary
Char, Clob, Long, Nchar, Nclob, Nvarchar2, Varchar, Varchar2	String
Date, Timestamp, Timestamp with Timezone	Timestamp with time zone converted
Number	Decimal

Configuring an Oracle JDBC Table Origin

Configure an Oracle JDBC Table origin to read data from one or more Oracle database tables. Before you use the origin, install a JDBC driver.

On the Properties panel, on the General tab, configure the following properties:


General Property	Description
Name	Stage name.
Description	Optional description.
Load Data Only Once	Reads data while processing the first batch of a pipeline run and caches the results for reuse throughout the pipeline run. Select this property for lookup origins. When configuring lookup origins, do not limit the batch size. All lookup data should be read in a single batch. Do not select this property when you configure the origin to read from more than one table.
Cache Data	Caches data processed for a batch so the data can be reused for multiple downstream stages. Use to improve performance when the stage passes data to multiple stages. Caching can limit pushdown optimization when the pipeline runs in ludicrous mode. Available when Load Data Only Once is not enabled. When the origin loads data once, the origin caches data for the entire pipeline run.
Skip Offset Tracking	Skips tracking offsets. The origin reads all available data for each batch that the pipeline processes, limited by any batch-size configuration for the origin.

On the Connection tab, configure the following properties:


Connection Property	Description
JDBC Connection String	Connection string used to connect to the database. Use the following format: `jdbc:oracle:<driver type>:@<host>:<port>:<service name>` For example: `jdbc:oracle:thin:@localhost:1111:xe`
Use Credentials	Enables entering credentials. Use when you do not include credentials in the JDBC connection string.
Username	User name for the JDBC connection. The user account must have the correct permissions or privileges in the database.
Password	Password for the account. Tip: To secure sensitive information, you can use credential stores or runtime resources.
Additional JDBC Configuration Properties	Additional JDBC configuration properties to use. To add properties, click Add and define the JDBC property name and value. You can use simple or bulk edit mode to configure the properties. Use the property names and values as expected by JDBC.

On the Table tab, configure the following properties:


Table Property	Description
Schema	Name of the schema in which the tables are located. Define when the database requires a schema.
Tables	List of database tables to read. The list can contain exact table names and table-name patterns. Patterns can include the wildcards `%` or `_`. The `%` wildcard matches any substring of 0 or more characters. The `_` wildcard matches any one character. For example, suppose a database has tables named MyTable, Table, Table1, and Table10, and you enter: `Table, Table_, %Table` Then the origin reads the tables named MyTable, Table, and Table1, but not Table10. The list must match at least one table.
Offset Column	Table column used to track processed rows and to create partitions. The specified column has the following requirements: Must be in all the tables that the origin reads Must be a supported offset data type Should contain unique, incremental values and should not contain null values By default, the origin uses the primary key column as the offset column. Specify another column as needed.
Max Number of Partitions	Maximum number of partitions to use to read a batch. Default value is 10. For information about partition columns when skipping offset tracking, see Partition Column Selection.
Columns to Read	Columns to read from each table. If you specify no columns, the origin reads all the columns in each table. Specified columns must exist in all the tables that the origin reads. Click the Add icon to specify an additional column. You can use simple or bulk edit mode to configure the columns.
Additional Predicate	Additional predicate to include in the WHERE clause of the query. Use Spark SQL syntax.

On the Advanced tab, configure the following properties:


Advanced Property	Description
Specify Fetch Size	Enables specifying a specific fetch size.
Fetch Size	Suggests the number of rows that the JDBC driver should fetch with each database round-trip. Use 0 to skip defining a fetch size. For more information about configuring a fetch size, see the database documentation.
Partition for NULL	Enables processing records with null offset values. Generates a partition in each batch that includes all records with null offset values. Note: Enabling this property is likely to result in the processing of duplicate records.
Use Custom Min/Max Query	Enables overriding the default min/max offset query that the origin uses to determine the first set of records to read from each table.
Custom Min/Max Query	Custom Spark SQL query that returns the minimum and maximum offset values to read, in this order.
Use Custom Max Query	Enables overriding the default max query that the origin uses to determine each subsequent set of records to read.
Custom Max Query	Custom Spark SQL query that returns the maximum offset values to read.
JDBC Driver	JDBC driver to include with the pipeline: Bundle driver from connection string - Transformer bundles a JDBC driver with the pipeline. Select this option to use an Oracle JDBC driver that you installed on Transformer as an external library. Bundling a driver ensures that pipeline can run on all Spark cluster nodes. Bundle custom driver - Transformer bundles the specified driver with the pipeline. Select this option to use a third-party driver that you installed on Transformer as an external library. Bundling a driver ensures that the pipeline can run on all Spark cluster nodes. Do not bundle driver - Transformer does not include a driver with the pipeline. Select this option in the rare case that each node of the Spark cluster includes a compatible JDBC driver for the pipeline to use.
Driver Class Name	Class name of the custom JDBC driver to use.